Day: June 2, 2021

The Benefits Of Using Filter Fabric For Playground Surfacing

playground surfacing

A playground surfacing material is essentially the material that lays beneath and around all playground equipment, including swings, walkways, monkey bars, and other playground items. The surfacing materials are typically manufactured out of rubber or wood and specifically designed for aesthetic, structural, and disability accessibility purposes. When purchasing playground surfacing for your playground, it is important to choose a material that is durable, weather resistant, easily maintainable, and affordable. There are a variety of different surfacing materials to choose from such as flagstone, concrete, wood, asphalt, brick, concrete pavers, sand, vinyl, and even composite materials like Play scrub. However, playground surfacing is most often made out of cast-in-place epoxy resins. Epoxy is a thermosetting polymer which is mixed with a curing agent, and when hardened it becomes a very dense and resilient material which is able to withstand many different types of weather and can even be refilled with resin if broken or cracked.

Why you choose Filter Fabric For Playground Surfacing?

When shopping for playground surfacing options, you will first need to decide between concrete, wooden, or asphalt surfaces and then determine what surfacing options are best suited for these surfaces. If you have an asphalt surface, then you will most likely want to choose asphalt surfacing options because of its ability to resist bacteria, mold, and algae growth. However, if you have an inorganic or composite surface (like concrete or sand) then you will probably not need to put a filter fabric on the surface. Usually, these surfaces can be cleaned simply by sprinkling some water on it once a day and rinsing off with water and a brush.

However, if you have a playground with a curved surface, then it is recommended to apply a filter fabric which is polyester or fiberglass based so that it will provide excellent structural and architectural integrity. Typically, these filter fabrics are approved for playground surfacing materials by the American Society for Testing and Materials (ASTM). playground surfacing materials like concrete, wood, and asphalt should have a standard specification that states the amount of UV-ultraviolet (UV-UV) exposure that can occur during summer months. The standard specification for this type of exposure is 400 watts per square meter, which is equivalent to the maximum exposure that can occur from the sun. All other types of playground surfacing materials are advised to have a much lower standard specification.